This machine is used to bind the filter media with the end cap after adhesive is poured over it. Two Hot Plates-one at the top and the other at the bottom press the assembly electro-pneumatically and the adhesive gets bonded to the end cap/filter media and support tube due to heat.

The salient features of this Hot Plate are:

• Movement of the top Hot Plate is through Pneumatic Cylinders
• Bottom Hot Plate is fixed and insulated to prevent heat loss.
• Pneumatic system is complete with all the regulating arrangements like Pressure Regulator, Pressure Gauge, Safety Valve, FRL unit with Air Release Valve etc.
• Provided with Pre-set Timer and Buzzer to indicate the completion of heating cycle.
• Provided with auto cut-off system to stop the machine on reaching the heating cycle.
• Provided with Digital Temperature Display and Controller.
• Top Plate can retract automatically on completion of heating cycle through PLC based control system
• Standard table size is 500mm (L) x 600mm (W) x 750mm (H). However this size can vary based on customer requirement.
• Utilizes heat load of up to 6 KW.